Under the section, select your exact IC (e.g., PS2251-07).
When the tool displays a green PASS or OK , close the program, , and then reinsert it . Your drive should now appear with the intended capacity and settings.
In the settings window, you must manually select the correct Burner File (e.g., BN07V502TAW.BIN ) and Firmware File (e.g., FW07V50253TW.BIN ) that match your controller and memory type.
To take advantage of the Phison MPall V5.13.0c firmware update, users typically need to: Phison Mpall V5.13.0c
Flashing microcontrollers can be notoriously finicky. If your flash fails, look closely at the error codes displayed in the MPALL user interface grid slot. 1. Error Code: 0x1042 (CT - Flash Read Error / ISP Fail)
(or a similar parameter editor in the folder) to create a configuration ( Alternatively, run MPALL_F1_7F00.exe to see if your drive appears in one of the slots. 3. Configuration (Setting the Parameters) Open the settings (usually MPParamEdit ) and configure the following: Controller : Select your specific controller (e.g., PS2251-67). based on your drive and port. Flash Setting : Enter your if it doesn't auto-detect. Partition Settings
: Dividing the flash drive into a fixed "read-only" ISO partition and a standard storage partition. Under the section, select your exact IC (e
Unlike standard formatting tools provided by operating systems, MPall operates at the firmware level. It communicates directly with the controller chip on the flash drive’s Printed Circuit Board (PCB). This allows it to perform low-level operations that standard computers cannot access.
Disable your antivirus temporarily, as these low-level tools are often flagged as false positives.
Download and run to scan the USB device. Note the VID, PID, Controller Model, and Flash Type . For example, a Kingston DataTraveler 3.0 may show VID=0951 PID=1666 Controller=PS2251-07 . In the settings window, you must manually select
You must open the plastic casing of the USB drive and enter Hardware Test Mode . Use a needle or a small flathead screwdriver to carefully short the data pins (typically pins 29 and 30) on the NAND flash memory chip while plugging it into the computer. This forces the controller into a generic safe state, allowing MPALL v5.13.0C to see the device. Conclusion
To extract the exact hardware specifications of your flash drive, download a free hardware diagnostic tool such as or ChipGenius .
Phison Mpall V5.13.0c is a firmware developed by Phison Electronics, a leading Taiwanese company that specializes in designing and manufacturing NAND flash controllers and other related products. The firmware is designed to work with Phison's range of NAND flash controllers, which are used in various applications such as solid-state drives (SSDs), USB flash drives, and other storage devices.
Before opening MPALL, you must verify that your USB drive actually uses a supported Phison controller.
: A comprehensive archive of Phison tools and firmware.