The GMR-32B features a built-in digital display and a four-button interface () to configure operational parameters. Parameter Menu Navigation
Two phases are swapped. You must swap any two of the L1, L2, or L3 input wires to fix the sequence. Phase Loss / Unbalance:
Route your raw three-phase power lines (L1, L2, L3 or R, S, T) directly to the sample input terminals on the controller.
Terminal connections must follow absolute path designations to protect internal logic loops from feedback surges.
The is a high-precision, industrial-grade electronic device designed for advanced power modulation and phase-angle control. It is widely utilized in industrial heating systems, motor speed regulation, and transformer primary control. This comprehensive manual provides the essential installation steps, wiring configurations, programming parameters, and troubleshooting protocols required to safely operate the unit. 1. Safety Specifications and Warnings High Voltage Hazard
Standard connections for R, Y, and B (or L1, L2, L3) phases.
HIGH VOLTAGE POWER TERMINALS +------------------------------------+ | L1 (Line In) T1 (Load Out) | +------------------------------------+ LOW VOLTAGE CONTROL TERMINALS +------------------------------------+ | COM | 4-20mA | 0-10V | +10V | Alrm | +------------------------------------+ Power Connections (High Voltage) Connect incoming AC live line wire.
Complete Technical Guide and Manual for the GMR-32B Phase Controller
) to the corresponding three main input voltage terminals on the module. 2. Auxiliary Control Circuit Wiring
The you are controlling (e.g., silicon carbide heating elements, transformer loads, or fans).
: Energize the main grid line. Verify that the Normal green LED lights up.
The GMR-32B features a built-in digital display and a four-button interface () to configure operational parameters. Parameter Menu Navigation
Two phases are swapped. You must swap any two of the L1, L2, or L3 input wires to fix the sequence. Phase Loss / Unbalance:
Route your raw three-phase power lines (L1, L2, L3 or R, S, T) directly to the sample input terminals on the controller. gmr-32b phase controller manual
Terminal connections must follow absolute path designations to protect internal logic loops from feedback surges.
The is a high-precision, industrial-grade electronic device designed for advanced power modulation and phase-angle control. It is widely utilized in industrial heating systems, motor speed regulation, and transformer primary control. This comprehensive manual provides the essential installation steps, wiring configurations, programming parameters, and troubleshooting protocols required to safely operate the unit. 1. Safety Specifications and Warnings High Voltage Hazard The GMR-32B features a built-in digital display and
Standard connections for R, Y, and B (or L1, L2, L3) phases.
HIGH VOLTAGE POWER TERMINALS +------------------------------------+ | L1 (Line In) T1 (Load Out) | +------------------------------------+ LOW VOLTAGE CONTROL TERMINALS +------------------------------------+ | COM | 4-20mA | 0-10V | +10V | Alrm | +------------------------------------+ Power Connections (High Voltage) Connect incoming AC live line wire. Phase Loss / Unbalance: Route your raw three-phase
Complete Technical Guide and Manual for the GMR-32B Phase Controller
) to the corresponding three main input voltage terminals on the module. 2. Auxiliary Control Circuit Wiring
The you are controlling (e.g., silicon carbide heating elements, transformer loads, or fans).
: Energize the main grid line. Verify that the Normal green LED lights up.