Set the default baud rate (usually or 921600 for DLC32 boards).
Ensure your motor movements are accurate.
Launch MKSLaserTool.exe and select MKS ESP32 Download Tool .
Choose your preferred installation directory and click .
Resolves issues from previous versions, such as button failure or connection issues with the motherboard. mks laser tool setup v112exe download upd
Always download Makerbase software directly from their official open-source repositories:
Easily upload the latest official Makerbase GRBL firmware to your DLC32 board without compiling code.
Below is a blog-style guide to help you with the installation and setup process. Complete Guide to MKS Laser Tool Setup (v1.1.2)
Ensure the CH340 USB driver is installed so your PC recognizes the board. Set the default baud rate (usually or 921600
Get the installer ( .exe ) from the MKS-DLC32 GitHub repository .
📘 If Wi‑Fi configuration fails with a “failed” message, double‑check the COM port, ensure the USB cable is securely connected, and reinstall the CH340 driver if necessary.
Click the appropriate link to download the .exe file (typically a portable version).
A more stable process for upgrading your DLC32 board to the latest firmware. Choose your preferred installation directory and click
Assuming you have a valid service contract or a legacy CD-ROM, here is the legitimate procedure to get version 1.1.2 running.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
: MKS DLC32, MKS DLC, and standard ESP32-based laser motherboards.
Choose an installation path. It is recommended to leave this at the default C:\Program Files or a dedicated C:\MKS-Laser folder to avoid deep directory path errors.
MKS Laser Tool Setup V1.1.2.exe Download and Configuration Guide