This board features an . While it supports a variety of Core 2 Duo and Core 2 Quad processors, you must check your specific BIOS version to ensure compatibility with higher-end Quad-core chips. Always apply fresh thermal paste when swapping out a CPU. 2. Graphics (GPU)
Realtek ALC888S drivers are needed for functional sound in Windows.
If you are looking to complete a build or solve a specific error with this board, let me know: What and RAM capacity you are trying to install The exact symptoms or beep codes your system is producing
Auxiliary CPU power connector located near the CPU socket and rear I/O panel. acer mcp73tad motherboard manual verified
The (often branded as ECS MCP73T-AD ) is a legacy motherboard commonly found in older Acer Aspire desktop systems, such as the Acer Aspire M1641 and M3641 series . As a, budget-friendly board from the late 2000s, it served as a robust, entry-level component.
Fully supported. Drivers for the chipset, storage controllers, onboard graphics, and audio are readily available online via legacy NVIDIA and Realtek archives.
The Acer MCP73TAD is built on the NVIDIA GeForce 7100 and nForce 630i chipset (MCP73V). It was designed as a budget-friendly micro-ATX solution offering integrated graphics and support for Intel’s LGA 775 processor lineup. Processor Support Intel LGA 775 (Socket T) This board features an
This error means the motherboard is losing its settings when powered down. Replace the CR2032 coin-cell battery on the board with a new one. 3. Overheating and Sudden Shutdowns
Typically allows selection between +5V and +5VSB (standby) for waking the system via USB. 3. Verified Drivers and BIOS for MCP73TAD
2 x DDR2 DIMM slots (Supports DDR2 533/667/800 SDRAM) Maximum RAM: 4GB Maximum ( GB modules) The (often branded as ECS MCP73T-AD ) is
To use the headphone and microphone jacks on the front of your computer case, locate the header. This header uses the standard Intel High Definition Audio (HD Audio) pin allocation. Pin 1: MIC L (Microphone Left Channel) Pin 2: AGND (Analog Ground) Pin 3: MIC R (Microphone Right Channel) Pin 4: PRESENCE# (Active low signal) Pin 5: LINE2 R (Headphone Right Channel) Pin 6: MIC_RET (Microphone Jack Detection Return) Pin 7: OUT_SENSE (Front Audio Jack Detection) Pin 8: No Pin (Key) Pin 9: LINE2 L (Headphone Left Channel) Pin 10: LINE2_RET (Headphone Jack Detection Return)
NVIDIA GeForce 7100 / nForce 630i (single-chip MCP)
Before altering your hardware configuration or checking specific layout schematics, verify that your components match the electrical and physical constraints of the system board: Specification Details Custom Small Form Factor (SFF) / Micro-ATX derivative Processor Socket LGA 775 (Socket T) Chipset NVIDIA nForce 630i / GeForce 7100 (MCP73PV) Memory Support 2 x 240-pin DIMM slots supporting DDR2 SDRAM Maximum RAM Up to 4 GB total (Non-ECC, unbuffered 1.8V modules) Supported RAM Speeds 667 MT/s (PC2-5300) and 800 MT/s (PC2-6400) Expansion Slots 1 x PCI Express 2.0 x16, 1 x PCI Express 2.0 x1 Storage Interfaces 2 x Serial ATA (SATA II) 3.0 Gb/s ports, 1 x IDE Connector Integrated Audio Realtek ALC883 High Definition 5.1-Channel Surround Sound Integrated Networking 10/100/1000 Mbps Gigabit Ethernet controller Processor and Memory Compatibility CPU Support
is an OEM motherboard produced by ECS (Elitegroup Computer Systems) for use in Acer Aspire desktops like the and X1800 . Because it is an older LGA 775 board, official Acer manuals are typically general system guides. Detailed technical information is best found in the ECS MCP73T-AD Go to product viewer dialog for this item. manufacturer documentation. Core Technical Specifications