Driven by a single R1130 or LR1130 button-cell battery (included with standard purchase retail kits). Dimensions: Approximately 70 mm x 45 mm x 13 mm .
The signal wire (usually yellow or white) connects to the component being measured.
Press RESET (R) again. The hour digits will begin flashing.
If your clock is constantly beeping every hour on the hour, or if you need to shut off your morning alarm, follow this quick toggle trick: Press and hold the button. nako na617a user manual exclusive
The 617A series is optimized for small, integrated panel mounting.
The alarm function is a key feature for drivers and professionals alike. twice to enter alarm mode. Use to choose between adjusting hours or minutes, and to change the values. Press Toggle Alarm ON/OFF : In standard time mode, press
Single LR1130 (AG10) alkaline button cell battery Display Format: 12-hour (AM/PM) and 24-hour options Driven by a single R1130 or LR1130 button-cell
A: For NAKO models similar to the NA617A, you must be in the Time Setting Mode . When you scroll through the options using the [S] button, look for a setting that makes the "AM" or "PM" symbol disappear. Setting the time until those symbols vanish switches the clock to 24-hour mode.
This device stands out due to several key technical features outlined in its documentation:
If the display becomes dim or the alarm sound weakens, replace the AG10 battery by removing the back cover. Press RESET (R) again
Consider this your digital, ever-accessible manual.
Press M once; the screen should show 00:00:00 .