Ch-899 Chouchin Radio Controlled Clock Manual ❲LATEST • WORKFLOW❳

Automatically sets time, date, and changes for Daylight Saving Time (DST).

If successful, the clock will automatically adjust to the correct time and date, and the tower icon will remain solid. Optimizing Signal Reception

No, this is a feature found in many CH-899 movements. The second hand is programmed to stop automatically during the night, typically between 12:00 AM and 6:00 AM, to . It will resume moving automatically in the morning.

The CH-899 Chouchin is a high-precision, radio-controlled clock movement, known for its use in a wide range of timepieces, from classic cuckoo clocks to sleek modern wall clocks. It synchronizes itself with an official time signal, ensuring your clock always displays the exact, accurate time.

The hands will return to and start searching for a fresh signal. Troubleshooting Tips ch-899 chouchin radio controlled clock manual

Press and hold the SET button for 3 to 5 seconds. The second hand will stop moving, indicating it is in manual mode. Set the Time: Press once: Each press advances the clock by one minute.

Once powered, the hands will quickly advance to the 12:00 position and stop. The clock will then begin searching for the radio signal (WWVB in the US or MSF in the UK).

Immediately after inserting the batteries, the screen will light up, and a signal icon (resembling a radio tower) will begin flashing. This indicates the clock is searching for the atomic time signal. during this process. The initial search can take anywhere from 3 to 12 minutes .

The Ultimate Guide to the CH-899 Chouchin Radio Controlled Clock: Manual, Setup, and Troubleshooting Automatically sets time, date, and changes for Daylight

The clock is trying to find its baseline 12:00 index or is stuck in an initialization loop.

Remove the battery for at least 1 minute. Some models have two pins in the upper-left corner that can be short-circuited with a screwdriver to clear the memory. MSF Radio Controlled Wall Clock - TLC Electrical Supplies

Position the clock on a windowsill or an exterior wall facing toward the general direction of your local transmitter transmitter site (e.g., facing Colorado if you are in North America).

By following this manual, your CH-899 Chouchin clock will provide accurate timekeeping for years to come. The second hand is programmed to stop automatically

A: Yes. First, try pressing and holding the REC button for an extended period (over 5 seconds) to force a full reset and signal search. If that doesn't work, you can perform a hard reset by removing the batteries, waiting for at least 10 minutes to let the internal circuits fully discharge, and then reinserting fresh batteries.

Disclaimer: This guide is based on common radio-controlled clock mechanics. For specific hardware defects, please contact Chouchin customer support.

If storing the clock for an extended period, always remove the battery to prevent corrosion damage to the metal terminal contacts.

Use a dry, soft microfiber cloth to clean the exterior casing. Never use liquid cleaners or abrasive chemical sprays on the movement housing.