Switch off the charger at the power switch.
Never plug the charger into the wall until the battery connections are secure. How to use Car Battery Charger
battery charger instructions , covering setup, safety, and technical features. 1. Key Features of the Selmar Turbo 4
Because the Selmar Turbo 4 is a manual linear charger, Leaving it connected indefinitely will overcharge, boil, and permanently ruin your battery. Once the ammeter indicates the charge is complete: Unplug the charger's power cord from the AC wall outlet. selmar-turbo-4-battery-charger-instructions
Before you begin, it's crucial to understand what kind of charger you have.
Switch the charger on. The indicator light(s) should illuminate to show the unit is receiving power.
into the mains wall outlet until the crocodile clips are fully secured to the battery posts. Connecting live clamps creates massive sparks that can ignite airborne hydrogen gas. Step-by-Step Operating Instructions Switch off the charger at the power switch
Remove any white or green powdery corrosion from the battery posts using a wire brush or baking soda paste. Clean terminals ensure a strong electrical connection.
: Check the double fuse protection. If the clamps were accidentally reversed, the internal fuse may have blown to protect the unit. Needle stays high (Right side)
It is highly recommended to disconnect the battery from the vehicle to avoid potential damage to the alternator. Before you begin, it's crucial to understand what
Ideal for standard car and leisure batteries. Moving Arm Ammeter: Displays real-time charging current.
Ensure the clips are firmly connected to the terminals. Check that the charger is plugged into a functional outlet. Disclaimer: These instructions are based on typical Selmar Turbo 4A
Before operating the machinery, it helps to understand what the Selmar Turbo 4 delivers:
Ensure the charger is unplugged from the mains wall outlet before touching the clamps.