Digi Sm500 Scale User Manual

Remove all weight from the platter and press the key.

He stared. He wasn't measuring the glass. He was measuring the absence of the glass. The volume of air it displaced. The hole in reality where the glass used to be.

Run a label sensor calibration or update the label format settings in S Mode. Dirty print head or low temperature setting. digi sm500 scale user manual

Allow it to dry completely for two minutes before turning the power back on. Common Error Codes & Fixes Error Code / Issue Root Cause Action Required Unstable weight on platter

Some SM-500 variants have an internal filter setting: Remove all weight from the platter and press the key

Plug the unit into a dedicated wall outlet and flip the power switch located underneath the right side of the scale base. Loading Label Roll Open the printer side door. Remove the empty cardboard core from the supply spindle.

Detail the for connecting the scale to your point-of-sale (POS) system. He was measuring the absence of the glass

Regular maintenance and cleaning are essential to ensure the Digi SM500 scale continues to provide accurate and reliable performance:

Clean printhead with isopropyl alcohol; adjust density in P Mode. IP address conflict or disconnected cable

Press the key twice or until the display reads S MODE (Service/Program Mode). Press the PLU key to enter the item maintenance menu. Creating a New PLU Type the desired PLU number (e.g., 101 ) and press PLU .