Thomson Bluetooth Digital Alarm Clock Radio Btc2138 Manual -

Ensure the device is in (clock displayed, radio/Bluetooth turned off).

: Switch between High and Low brightness on the 0.9-inch red LED display to avoid sleep disruption Grays Auction Night Light Function : Includes a soft white night light built into the unit Grays Auction Sleep and Snooze

Press the button once more to confirm, or wait a few seconds for the display to stop blinking. 3. Setting Dual Alarms (AL1 & AL2)

Use your phone or the clock’s buttons to control playback, and the VOL buttons to manage output levels. 4. Operating the FM Radio thomson bluetooth digital alarm clock radio btc2138 manual

To save a favorite station, tune to it, then press the button. The slot tracker (e.g., P01 ) will flash.

Press and hold the button until the display flashes.

: A light next to the "Alarm 1" or "Alarm 2" label on the display indicates the alarm is active Snooze/Stop : Press the button to pause the alarm for 9 minutes, or the STANDBY/OFF button to stop it until the next day device.report steps or saving your FM radio presets Thomson Bluetooth Digital Clock Radio – Model BTC-2138 Ensure the device is in (clock displayed, radio/Bluetooth

Press or TUNE+ once to step through radio frequencies manually.

Search for available devices and select (or a similar naming convention like 'Thomson'). If prompted for a password, enter 0000 .

5V 1A (Optimized for overnight smartphone charging) Setting Dual Alarms (AL1 & AL2) Use your

THOMSON CR50 Alarm Clock Radio Instruction Manual

To adjust these settings, the device must be in (powered on but not playing music). Set Time :

or button to switch to Bluetooth mode (the display typically shows "bt" or a flashing Bluetooth icon). On your phone/tablet, search for or Thomson in the Bluetooth settings and select it to pair.

If you encounter any issues with your Thomson Bluetooth Digital Alarm Clock Radio BTC2138, refer to the troubleshooting section below: