Tap the or the clock icon in the top corner of the screen to open the administration menu.
Plug the USB drive into the USB port on the back of the Liso. Disconnect the power source.
The device reboots but never passes the logo. Cause: The bootloader is looking for a network configuration that no longer exists. Fix: Boot into recovery mode (Step 2). Select "Apply update from ADB" (do nothing). Then immediately select "Reboot to bootloader" and finally "Reboot". This forces the device to bypass the corrupted boot segment.
This process will erase all data on your USB drive, so ensure it's empty or has been backed up.
After completing the reset, the Liso's previous network settings, room assignments, and Evoko Home connection will be erased. You will need to set it up from scratch as a new device. evoko liso factory reset verified
Once authenticated, scroll through the admin options and select System or Device Settings . Select Factory Reset: Tap on Factory Reset or Wipe Device .
A factory reset rolls the device back to its factory-installed firmware or the last stable baseline partition. You will likely need to update the firmware immediately after the reset.
Open your web browser and navigate to your Evoko Home administration URL. Log in with your admin credentials.
Gather the following items before you begin: Tap the or the clock icon in the
This method completely wipes the device, unbinds it from Evoko Home, and resets it to factory defaults.
Search for the newly reset device via its IP address or Liso ID. Assign the unit to a specific meeting room calendar.
: Use imaging software like Etcher to flash the downloaded file onto a USB flash drive (Caution: this will delete all data on the USB).
Click on the Rooms or Monitoring tab from the main dashboard. The device reboots but never passes the logo
You need a USB 2.0 or 3.0 drive formatted to FAT32.
WiFi credentials or static IP settings.
: Do not remove the USB or power until the screen explicitly displays the text: "Flash has been successfully completed!" Reconfiguration
: Reconnect the PoE or power cable. The Liso will automatically detect the USB drive and begin a Confirm Reset
Continue holding the pinhole button for roughly 10 to 15 seconds until you see the Evoko boot screen change or an installation progress bar appear.