: If the neon indicator light is off, it typically signals an electrical issue. Use a multimeter to test for continuity in the thermostat and heating element. Replacement Options
Tighten the screws evenly on both sides until the clamp fits snugly around the pipe. Step 3: Mount the Faucet
Follow these five chronological steps to ensure a leak-free and highly efficient setup. Step 1: Installing the Feed Water Adapter
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. galaxy aqua premier installation manual
The shower head may be blocked with limescale. Soak the shower head in a descaling solution.
The Galaxy Aqua Premier utilizes a color-coded Quick-Connect system. To connect a tube, cut it squarely, push it firmly into the fitting until you feel it hit the backstop, and pull back gently to lock.
Connect the shower head to the hose. Make sure the rubber washers are in place at both ends of the hose. : If the neon indicator light is off,
: If the unit stops heating, the thermal safety device may have tripped due to overheating (often caused by low flow or limescale). Locate and press the internal reset button.
The system requires 40–80 psi. If your home has water pressure above 80 psi, you install a pressure reducer (not included in the standard kit) or you will void the warranty.
Shut off the main water supply valve to avoid accidental flooding during the plumbing phase. Step 3: Mount the Faucet Follow these five
to the terminal marked with the Earth symbol. Neutral (Blue or Black) to the terminal marked N . Live (Brown or Red) to the terminal marked L .
Route the electrical supply cable into the backplate, ensuring enough slack is left to reach the terminal block comfortably. Step 5: Securing the Backplate
Feed the water pipe and electrical cable through the respective entry ports on the backplate.
