: Look for a device labeled "FT232R USB UART" or "Unknown Device" under Ports (COM & LPT) Other devices Update Driver : Right-click the device and select Update Driver Browse my computer for drivers Target the Folder
If all checkboxes are ticked, congratulations – you’ve mastered the GEV189 driver installation on Windows 10 (new).
For professionals in construction and surveying, the GEV189 enables critical tasks such as uploading coordinate data to the total station, downloading field measurements to a PC, transferring configuration files, and updating instrument firmware.
The best place to start when looking for a driver is the official website of the manufacturer. In this case, you can try searching for the Gev189 driver on the official website of the company that produced the cable. usb download cable gev189 driver windows 10 new
After driver installation completes, connect the GEV189 USB cable to your computer.
Connect the 8-pin lemo connector to your powered-on Leica instrument. Verifying the Installation via Device Manager
: Right-click the device and select Update Driver > Browse my computer for drivers . : Look for a device labeled "FT232R USB
(Part No. 734700) is a critical piece of hardware used by surveyors, engineers, and geospatial professionals. It features a on one end to interface with Leica total stations (such as the TS06, TS09, TS12, and TS15) and a standard USB-A connector on the other to bridge connection to a PC. Because the
If you experience issues during the installation process or after installing the driver, try the following:
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. In this case, you can try searching for
: The most reliable source for up-to-date drivers is the Leica myWorld website . Registered users can find the latest USB cable drivers under the "Tools" or "Software" tab for their specific instrument.
The GEV189 features a USB connector on the computer side and a specialized instrument-side connector (often a Lemo 0 connector) that interfaces directly with the total station. When using the cable, it is important to ensure the red dot on the device aligns with the one on the cable for proper connection.
Once the driver is installed, you must tell your software which COM port to use.