For modern alloy rims requiring adhesive (stick-on) weights placed precisely on the inner barrel. 4. The Spin Cycle
: Pick a metal cone that fits the center hole of the wheel.
What separates this machine from generic balancers is its intelligent software. Here is how specific modes function:
: Optimized for alloy rims, allowing for precise placement of adhesive weights. corghi em 6040 wheel balancer work
The Corghi EM 6040 features automatic data input arms. Technicians pull out the integrated measuring gauge and touch it against the rim. The machine automatically registers the distance and diameter, saving time and eliminating manual entry errors. 3. The Spin Cycle
Supports rim diameters from 1" to 23" and widths from 1.5" to 20".
Pull the inner measurement arm out and touch it against the inner edge of the rim. Hold it for a second until the machine beeps. For alloy wheels, use the specific program settings to dictate exactly where adhesive weights will be placed. Step 4: Spinning the Wheel For modern alloy rims requiring adhesive (stick-on) weights
Traditional weights hammered onto the rim flange.
With the data entered and program selected:
Some versions of the EM 6040 include an integrated arm or ultrasonic sensor for automatic rim dimension measurement. However, the standard model uses a manual caliper but with an electronic interface that sends data directly to the computer, reducing entry errors. What separates this machine from generic balancers is
Proper mounting is critical for accurate measurement. The operator slides the wheel onto the heavy-duty balance shaft. Using the correct centering cone and pressure cup, the wheel is tightly secured against the back faceplate using the quick-release wing nut. Any deviation or looseness here will result in chasing weights. 2. Data Entry (The 3D Sensor System)
If the machine starts "chasing weights" (asking for weight adjustments repeatedly on the same wheel), technicians can perform a quick self-calibration routine using a standard test weight provided by Corghi.
On the EM 6040, this entire process takes . The display confirms the numbers.
: Manually input the rim width (in inches) using the control panel buttons after measuring with calipers. The Spin Cycle :
Standard programs for traditional steel or alloy rims where weights are hammered onto the inner and outer flanges.