How to Update CP Plus DVR, NVR, and IP Camera Firmware: A Complete Guide
Method 2: Updating via Web Browser or Network (IP Cameras & Recorders)
Be very cautious with third-party firmware websites. Always verify the firmware is intended for your exact model number before proceeding.
: Open a web browser and enter your camera or DVR's IP address (the default is often 192.168.1.108 ). Login : Enter your username ( admin by default) and password. cp plus firmware update
The firmware file was corrupted or interrupted during installation.
If you are updating the device remotely over a local network, use an Ethernet cable rather than Wi-Fi. Wireless drops can corrupt the data transfer. Step-by-Step Guide to Updating CP Plus Firmware
Open Internet Explorer (or Chrome/Edge using IE Compatibility Mode) and type the IP address into the URL bar. Log in with your admin username and password. How to Update CP Plus DVR, NVR, and
Enter your device IP address and admin credentials to log in. Navigate to Upgrade: Go to the maintenance/upgrade section.
Navigate to your device list, select the specific camera or recorder, and open its configurations.
Before diving into the "how," let’s understand the "why." Many users run their CP Plus devices for years on the factory firmware. Here’s what you are missing out on: Login : Enter your username ( admin by default) and password
Launch the ConfigTool and locate your device in the network discovery list.
Double-check the exact hardware version suffix on your device sticker. USB drive is incorrectly formatted or too large.
Check the physical sticker on the bottom or back of your CP Plus device. Alternatively, log into the web interface and navigate to System Info . A firmware file meant for a "CP-UVR-0401E1" will ruin a "CP-UVR-0401E1-CS" recorder. Match every single digit and letter perfectly.
