Do you need assistance setting up basic after the wipe?
The system will immediately prompt you to create a secure administrative password. Do not skip this step.
After formatting, you will need to provide a firmware image via to make the device functional again. This is the "nuclear option" for a truly clean state. Post-Reset: What Happens Next?
The 30D officially supports up to FortiOS (and 6.2.x with some limitations). The last supported firmware versions may vary depending on the exact hardware variant (including the Rugged 30D). fortigate 30d factory reset full
When prompted Press any key to enter configuration... (during the first few seconds), press a key immediately to stop autoboot. You will see a BIOS> prompt.
Before starting any of the procedures below, ensure you have the following ready and have noted these critical warnings.
Once the factory reset is complete (via any of the above methods), the FortiGate 30D will revert to the following default credentials: Do you need assistance setting up basic after the wipe
Once the reset is complete, follow these steps to regain control: Connect your laptop to Internal Port 1.
Before attempting a full reset, gather the following:
Method 2: Factory Reset via the Command Line Interface (CLI) After formatting, you will need to provide a
Use a paperclip, SIM ejector tool, or a sturdy pin to press and hold the reset button down.
Pros:
On the FortiGate 30D, the reset button is located on the rear panel near the power connector (or on the front panel depending on the exact model variant). It's typically labeled and may be recessed, requiring a paperclip or pin to press.