ATX, mATX, and SSI-CEB as standard; E-ATX and SSI-EEB support was available via specific tray options. Radiator Support: Top: Up to 120.4 (480mm) with integrated mounts. Lower Chamber: Supports up to 140.4 (560mm) side mounts.
The SMA8 utilizes a "Flex-Bay" system for the front face. The manual specifies that you must select the correct bay for your radiator size (e.g., 120.4 for a 480mm radiator).
To understand the SMA8 manual, you first have to understand what you're holding (or hoping to hold). The SMA8, part of CaseLabs' flagship line, was a full-tower PC case released in 2014. It was the culmination of decades of experience. The parent company was founded in 1971, originally manufacturing cases for military, medical, and industrial applications before pivoting to the consumer market in 2010.
Since CaseLabs cases were famous for their , assembly is more like building a piece of furniture than a standard PC case. 1. Where to Find the Manual caselabs sma8 manual
To keep your CaseLabs SMA8 looking and functioning flawlessly, regular maintenance is required due to its aluminum construction.
Slide the horizontal mid-plate divider between the front and rear vertical pillars.
Align the front frame vertical pillar with the front corner of the bottom panel. Secure using two 6-32 button head screws from the inside. Repeat this process for the rear vertical frame pillar. Step 2: Install the Mid-Plate Divider ATX, mATX, and SSI-CEB as standard; E-ATX and
The SMA8 accommodates dual power supplies in the bottom chamber.
: Used for securing the motherboard, SSDs, and standard drive caddies.
I can provide the exact layout steps or dimensions you need! Share public link The SMA8 utilizes a "Flex-Bay" system for the front face
A: The PCI backplate on the SMA8 had two options. If you selected the "Hex Mesh" option, it allows for massive airflow. If you selected the "Fan Holes" option, it has specific mounting for 40mm fans to exhaust heat from the GPU area. Ensure you are using the correct screws.
The SMA8 manual outlines a specific, modular assembly process. It is highly recommended to follow these steps sequentially to avoid damaging the aluminum panels. Phase 1: The Foundation and Bottom Assembly
: Once all components are in, place the case on a level surface. Tighten all frame screws fully. Hang the hinged doors—if they don't close perfectly, slightly loosen the hinge screws, align the door, and re-tighten. 8. Maintenance Tips
The best place to find the original documentation is the CaseLabs SMA8 Product Page Archive or via the Wayback Machine.