While officially as of November 2013, the standard remains widely referenced in industrial quality control and historical material specifications. Scope and Application of DIN 53357
If DIN 53357 is withdrawn or inaccessible for your region, check:
Samples shall be taken from the official sample in accordance with DIN 53350. No specimen shall be taken closer than 50 mm to the edge of the skin/hide.
DIN 53357 is a withdrawn, legacy technical standard used to measure the adhesion strength of plastic sheets, laminates, and coated fabrics through methods like the 90-degree German Wheel Peel Test. While inactive since 2013, it remains a common reference in industry for quality control, often replaced in modern testing by standards such as DIN EN ISO 2411. For more details, visit DIN Media . DIN 53357-A (accredited) - FILK Test Lab
: Specifically for the testing of packaging films. 4. Technical Considerations
Protective polymer laminates bonded to paper or synthetic substrates.
To help you move forward with your material testing or standard compliance, would you like more information on:
Testing the separation resistance of multi-layered, coated plastic fabrics.
DIN 53357 was a foundational standard for peel adhesion testing of plastic sheets and films. Its clear procedures and defined equipment, such as the 90° peel wheel, allowed for consistent quality assessment. Though now a historical document, its legacy continues through numerous international standards that ensure the reliability of bonded materials across a vast array of modern products. While obtaining the original PDF requires an official purchase, understanding its role and the standards that followed it is essential knowledge for anyone in quality control, manufacturing, or materials science.
used in automotive and construction industries. 2. Testing Methodology
Requires a tensile testing machine capable of maintaining a specific constant speed, often 100 mm/min .
In the realm of materials science and engineering, adhesive bonding has emerged as a crucial technique for joining materials. The increasing reliance on adhesive bonded joints in various industries, including aerospace, automotive, and construction, has led to a growing need for standardized testing methods. One such standard is DIN 53357, which specifically deals with the testing of adhesive bonded joints. This article aims to provide an in-depth exploration of DIN 53357 PDF, its significance, and the testing procedures outlined in the standard.
Accredited laboratories like FILK often have the standard on hand for testing services.
Results are typically expressed in units of force over width, such as N/5cm or kg/5cm . Common Applications:
The resulting calculation, known as the peel force or delamination value, is critical for predicting whether a packaging material will rupture during shipping, storage, or consumer handling. Key Testing Methods: Method A vs. Method B
If you produce rubber compounds (NBR, FKM, EPDM, etc.), your customers will demand proof of oil resistance. The data generated under DIN 53357 becomes part of your technical data sheet (TDS).