!!top!! | Convo Inverter Cvf-s1 Manual

The drive defaults to panel control (keypad) but supports terminal control for remote start/stop. I/O Configuration: 3 dedicated digital inputs for basic functions and 7 programmable digital inputs for up to 16-speed multi-step operation. Analog Interface:

Convo CVF-S1 (often referred to under the G2P2 or CVF series) is a general-purpose industrial AC drive. A full guide for this inverter focuses on safety, wiring, and parameter setup to control induction motors. 1. Core Safety Precautions

features a digital operation panel for configuration and real-time monitoring. offer-product.oss-cn-beijing.aliyuncs.com Standard Operation: Convo Inverter Cvf-s1 Manual

: The motor is running beyond its rated current limit for too long, or parameter L1-02 is set too low.

To ensure long and reliable operation, follow this maintenance schedule: The drive defaults to panel control (keypad) but

Wiring must be performed by qualified personnel. Ensure input power is disconnected before starting work.

The manual provides a clear terminal diagram. Let's decode the most confusing part: the control terminals. A full guide for this inverter focuses on

To program the CVF-S1, press , use the arrow keys to find the parameter group, press ENTER , change the value, and press ENTER again to save. Parameter Code Description Default Value Recommended Setting F0.00 Command Source Selection 0 (Keypad) 0 for Keypad, 1 for Terminal Control F0.01 Frequency Source Selection 0 (Keypad) 0 for Keypad, 2 for Analog Input (Potentiometer) F0.04 Maximum Output Frequency Set to match motor nameplate (50.00 / 60.00 Hz) F0.07 Acceleration Time 1 Time in seconds to reach max speed (e.g., 10.0s) F0.08 Deceleration Time 1 Time in seconds to stop from max speed (e.g., 10.0s) F1.00 Motor Rated Power Model dependent Input matching motor nameplate kW F1.02 Motor Rated Current Model dependent Input matching motor nameplate Amperes 4. Basic Commissioning Steps Follow these steps for a safe first-time startup:

Local panel control. The keypad's RUN and STOP keys dictate operations.

Always twice to save. Cycle power if parameters do not retain.

Keep cooling fans clean to prevent overheating.