Gateman 1544 Manual: Verified New!

To prevent fingerprint patterns from being traced on the keypad, the 1544 requires a "Palm Touch." You touch the keypad with your palm to wake it up, enter the code, and then touch it again with your palm to verify. Double Lock Mode (Internal Privacy)

Note: Always perform this with the door open to avoid accidental lockouts! 2. Registering Key Tags (RFID)

Ensure the strike plate on the door frame is perfectly aligned. If the bolt hits the plate, the motor will strain and fail to lock.

Most digital locks are designed for the 1.5V output of Alkaline batteries; rechargeables (1.2V) can cause erratic behavior. gateman 1544 manual verified

Touch the keypad with your palm → Enter PIN Code → Press [*] or [#] (depending on model) or touch the keypad again.

Press the (star) button or press the [I] / [R] button inside to complete. 2. Registering RFID Cards or Key fobs

: If the batteries die, touch a 9V battery to the external contact points to provide temporary power for PIN entry. To prevent fingerprint patterns from being traced on

: Press the interior Registration button to complete the process. Essential Everyday Operations Operational Feature Action Required Locking from the Outside (Manual Mode) Touch the front keypad gently with your palm. Locking from the Inside (Manual Mode) Turn the mechanical manual thumbturn device. Enabling Auto-Lock Mode

button again to finalize. The new code will overwrite the old one. Registering Key Tags / Cards Open the battery cover and press the

Press and hold the 9V battery contacts firmly against these terminals. Registering Key Tags (RFID) Ensure the strike plate

Touch your first RFID card or key tag to the exterior card reader icon.

If your specific Gateman variant utilizes contactless keycards, follow this continuous loop sequence. Note that registering new cards deletes older ones unless they are registered in the same session. : Press the R button inside the battery cover.