This comprehensive manual provides step-by-step instructions to program your Chunghop EH907, troubleshoot connection issues, and maximize its features. 🛠️ Getting Started: Battery Installation
is equipped with an alternative coding method to ensure full compatibility. Group Code Setup
The remote is likely programmed to a code that is close to your brand but not identical. Repeat the programming process to find a secondary code that offers full functionality.
Each press sends a new code. When the volume bar appears on your TV, press to save the code. Troubleshooting and Maintenance E-H907-TV remote control for Hisense- CHUNGHOP.COM chunghop eh907 manual full
Ensure there is a clear line of sight between the front of the remote and the infrared receiver on the Hisense TV.
Test the power, volume, and menu buttons to ensure full control. Use this method if the direct code does not work. Turn on your TV and point the remote at it.
| Issue | Possible Cause and Solution | | :--- | :--- | | | No/Low Batteries: This is the most common cause. Try replacing the batteries with fresh ones. | | | Obstruction: Ensure there is a clear line of sight between the remote and the TV. Remove anything blocking the front of the remote or the TV's sensor. | | Remote works intermittently | Dying Batteries: Again, try replacing the batteries. A weak battery can cause signal issues. | | Some buttons work, others don't | Incorrect Code: You likely have a code that is partially compatible but not the perfect one for your TV model. Try the other codes from your list using the Direct Code Entry method. | | Cannot find a working code | Code List is Wrong: You may be using a code list that is incompatible with the EH-907 model. Try using the auto-search method if your remote has it. | | | Compatibility Issue: It is possible your very specific Hisense TV model is not fully compatible with this universal remote. | Repeat the programming process to find a secondary
If some keys don't work after setup, repeat the programming process to find a more compatible code within the same brand group.
There are three distinct ways to program your Chunghop EH907. Choose the method that best fits your situation. Method 1: Quick Search by Brand (Recommended)
Ensure the television is completely powered on. | | Philips | 014
: Users have reported that the volume adjustment speed on the may be slower than original factory remotes.
If you experience issues or want to start the programming process from scratch, you can reset your Chunghop remote to its factory settings:
| Brand | 3-Digit Code | Notes | | :--- | :--- | :--- | | | 247 , 209 , 279 , 215 , 233 , 241 , 242 , 250 , 251 , 253 , 273 , 254 , 255 , 257 , 258 , 259 , 260 , 261 , 262 , 263 , 264 , 269 , 270 , 271 , 272 , 273 , 274 , 275 , 277 , 278 , 279 , 280 , 281 , 282 , 284 , 289 , 291 , 292 , 293 , 295 , 296 , 298 , 299 | As Hisense is the primary brand for this remote, it has a large number of codes available. | | Samsung | 120 , 124 , 125 | Standard codes for Samsung TVs. | | LG | 001 , 003 , 004 , 005 , 006 , 007 , 008 , 012 | These codes are commonly found in other Chunghop manuals. | | Sony | 002 , 076 , 095 | Standard codes for Sony TVs. | | Panasonic | 017 , 018 , 034 | Standard codes for Panasonic TVs. | | Sharp | 026 , 027 , 028 | Standard codes for Sharp TVs. | | Toshiba | 030 , 031 , 032 | Standard codes for Toshiba TVs. | | Philips | 014 , 015 , 016 | Standard codes for Philips TVs. | | JVC | 010 , 011 | Standard codes for JVC TVs. | | Hitachi | 022 , 045 | Standard codes for Hitachi TVs. |
Press and hold the corresponding number key (e.g., , depending on your specific model series) for a few seconds.
Release both buttons. The indicator light should remain lit.