Rk3328 Firmware Android 10 ~upd~ Download Jun 2026

Run DriverInstall.exe as Administrator, click "Install", and reboot your PC. Open Flash Tool: Launch RKBatchTool.exe or FactoryTool.exe .

Click in the tool, unplug the USB cable, and reconnect your TV box to its regular power adapter and TV monitor.

Look at the FactoryTool screen. Once you see a device state change to or Maskrom , release the reset button. Step 4: Flash the Firmware

The tool will verify and load the firmware, which may take a few moments. Step 3: Connect the TV Box to PC rk3328 firmware android 10 download

Ensure your TV box is completely unplugged from its power adapter.

To flash the downloaded .img firmware from a Windows PC to your RK3328 device, you will need to download the following utility tools:

Keeps your data partitions intact (Not recommended when jumping from older Android versions). Run DriverInstall

Finally, remember that Android TV 10 (ATV) is different from tablet Android 10. If you want a real TV interface, search for “RK3328 Android TV 10 firmware” (often labeled as “ATV10”).

: For those with the ROC-RK3328-PC , Firefly provides documentation on compiling Android 10 from source.

Important: Always match firmware to your exact device model and hardware revision. Using a build for a different board frequently causes failures. Look at the FactoryTool screen

: Ensure your device is a true RK3328. Some boxes labeled as such may actually contain the RK3318 chip, which requires different firmware. Use the Right Tools : Use rkdeveloptool for flashing via a PC connection.

Pay close attention to identifiers like AP6255, RTL8723, or SV6051. A mismatch will cause Wi-Fi and Bluetooth to break after installation.