EDX SignalPro is a comprehensive and fully featured RF planning software suite offering all the study types needed to design wireless networks, including; area studies, link/point-to-point studies, point-to-multipoint and route studies.With support for wireless systems from 30 MHz to 100 GHz, plus advanced network design capabilities, SignalPro is the engineers tool of choice for planning, deploying and optimizing, Broadband, LTE, Mobile/Cellular, WiMAX, Mesh, in-building DAS, LMR and more.
EDX SignalPro integrates with Bing™ maps, providing a visualization layer for network design and presentation purposes. Results may also be exported to a KML/KMZ format for viewing studies in Google Earth®. In addition, these studies may be exported to MapInfo® and ArcView® formats as well as image files such as PDF, JPG, BMP and others. Multiple map views within SignalPro show project studies and GIS map data simultaneously.
For manufacturers, inspectors, and quality assurance professionals, a thorough understanding of Article 9 is not merely a regulatory requirement—it is the foundation of effective visual examination and, by extension, of quality and safety in pressure equipment construction worldwide.
Surface cracks, corrosion, undercut, spatter, coating issues No sub-surface detection; relies on operator vision Key Codes ASME Section V, Article 9; API RP 577 Best For
For detailed guidance, it is always recommended to consult the current edition of the ASME BPVC Section V, as interpretations may vary. If you'd like, I can: Explain how to a VT report according to Article 9.
The article categorizes visual testing into three primary techniques based on how the inspector interacts with the surface: asme section v article 9
Personnel performing Visual Examination must be qualified and certified.
The eye must be positioned at an angle not less than 30 degrees to the surface being examined.
Identifying corrosion, erosion, and physical damage in valves, boilers, and piping. Leak Testing: Monitoring for visible leaks during pressure tests. 2. General Requirements for Procedures The article categorizes visual testing into three primary
The specific certification levels required for the technicians executing the work.
. It is the foundational standard for detecting surface-related discontinuities—such as cracks, porosity, and misalignment—that could compromise the integrity of pressure-retaining components. UBA Universidad de Buenos Aires 1. Scope and Core Purpose
:
ASME Section V Article 9 is far more than a simple visual inspection checklist. It establishes a comprehensive framework for reliable, reproducible, and defensible visual examination—one that integrates personnel qualifications, written procedures, equipment requirements, viewing conditions, and documentation into a cohesive system.
Remote VT is used when direct access is restricted, employing tools such as: For inspecting internal piping. Mirrors/Magnifiers: For limited-access areas. Cameras: For remote monitoring. 4. Key Duties in Visual Inspection (VT)