Run the executable ( FirstChip_MpTools.exe or similar) as an Administrator. 3. Connect the Flash Drive Plug in the damaged FirstChip USB drive.
Before MPtools:
Monitor the progress bar. The software will sequence through stages: Erasing , Checking Flash , Writing Firmware , and Formatting . This process can take anywhere from 2 minutes to over an hour depending on the physical size and speed of the NAND memory.
v1052 is one of the more stable versions for these controllers. Newer NAND types may require later tool versions. firstchip fc1178 fc1179 mptools v1052
If you suspect the drive was a "fake capacity" scam drive, ensure the capacity settings are set to Auto . MPTools will automatically shrink the drive down to its true, safe physical size.
Comprehensive Guide to FirstChip FC1178 & FC1179 MPTools (v1.0.5.2)
FirstChip (Shenzhen FirstChip Technology Co., Ltd.) is a prominent Chinese manufacturer of USB flash drive controller chips. Their controllers, particularly the and FC1179 , are extremely common in the flash storage market. They are frequently found inside generic USB drives, promotional thumb drives, and even some branded devices. Run the executable ( FirstChip_MpTools
Improved MLC (Multi-Level Cell) card opening yields.
Right-click on FirstChip_MPTool.exe and select . Step 2: Device Detection
The tool detects the flash but fails during verification with "ErrorCode(5), Descript: Verify data failed". Before MPtools: Monitor the progress bar
When a USB flash drive stops working, appears as "No Media," or becomes write-protected, it's often not physically broken, but rather, its firmware is corrupted. For flash drives built with , specifically the
Proceed only if the tool displays along with FC1178 or FC1179 . Step 2: Download and Environment Setup