If you are in possession of a unit described as "wittmann tempro plus d 360 manual exclusive" or need to acquire the documentation, here is a strategic approach:
Wittmann technical publications are indexed by a specific part number (e.g., M146.0006 for older models). Search for that number, not just the model name. The serial number ( S/N: 306344 for a 2017 model in one listing) is also a key identifier for Wittmann service technicians.
The unit features maintenance-free, magnetically-coupled pumps. Because the pump has no dynamic shaft seals, it is virtually leak-proof, enhancing safety and reducing maintenance downtime. For users seeking the ultimate in energy efficiency, the D 360 is compatible with Wittmann's frequency-controlled pump. The EcoDrive varies pump speed (typically between 1,200 and 4,000 rpm) to match the actual demand, achieving energy savings of at least 45% compared to constant-speed pumps. The 24 kW heating system is designed for direct, efficient heat transfer.
Heater stops, but pump runs until the "Cool-down Point" is reached. wittmann tempro plus d 360 manual exclusive
±0.2∘Cplus or minus 0.2 raised to the composed with power C
The Wittmann Tempro Plus D 360 manual is an exhaustive guide that provides detailed information on the machine's operation, maintenance, and troubleshooting. The manual covers the following topics:
Do you need help with a particular , such as the pump or the heating controls? Share public link If you are in possession of a unit
Check for leaks around the magnetic pump coupling, manifold connections, and hoses.
Key engineering features include:
The TEMPRO plus D series is categorized by its maximum operating temperature and pump performance. Model Feature Standard Specification Up to 160°C (D160) or 180°C (D180) Heating Capacity 9 kW standard (options for 12 kW or 16 kW) Pump Performance The EcoDrive varies pump speed (typically between 1,200
The series represents the high-end tier of Wittmann’s temperature control units (TCUs), designed for precision and ease of use in injection molding. While "360" often refers to the maximum operating temperature in degrees Fahrenheit (equivalent to approximately 180°C) for specific oil or pressurized water models, the Tempro Plus D line is broadly defined by its advanced touch-screen interface and self-optimizing microprocessor control. Core Features of the Tempro Plus D Series
Uses a microprocessor to maintain accuracy within ± 0.2 °C.
WITTMANN's philosophy behind the Tempro series is consistent: smaller is smarter. By incorporating a smaller heat exchanger, the circulating water volume is minimized. This design choice leads to significantly shorter preheating and cooling times, directly translating to faster cycle times and increased productivity. This foundational principle is evident across the entire line, including the D360.
The is a high-performance temperature control unit (TCU) featuring a 5.7" color touch-screen for precise mold temperature regulation. While standard models cover ranges like 90°C (open systems) or up to 180°C (pressurized systems), the series is defined by its modular pump and cooling options. Core Interface & Operation
: Cools down and then automatically evacuates the mold using air purging. Standard Technical Features TEMPRO MOld TEMPERaTuRE COnTROllERs
