Canon+service+tool+v4718+updated -

: Click the Set button located immediately to the right of the Absorber menu option.

after resetting. Compare this new printout with the earlier one to verify the reset was successful.

: Updates firmware or resets the printer after replacing critical parts like the logic board.

If you attempt to use an outdated or modified version of the Service Tool on a newer printer model, the printer firmware may permanently lock itself. This is known as a corrupted EEPROM or a bricked mainboard. If this happens, the printer will no longer enter Service Mode, and the physical motherboard must be replaced. Always ensure you are using the verified, updated V4718 version. Physical Maintenance Warning

: Hold the Stop/Reset button, then press and hold Power . While holding Power, release Stop and press it 5 or 6 times (depending on the model). canon+service+tool+v4718+updated

Reliable at bypassing the "ink absorber full" notification. Supported Canon Printer Models

: The primary function is to reset the main and auxiliary ink absorbers to 0%, allowing the printer to resume operation. EEPROM Operations

To use this tool effectively, specific procedural steps must be followed: Service Mode:

: One-click functionality to clear the "Main" and "Platen" waste ink counters. : Click the Set button located immediately to

: Instantly clears the 5B00 error code.

— The tool allows you to set the printer's regional destination (ASA, AUS, BRA, CHN, CND, EMB, EUR, JPN, KOR, LTN, TWN, USA). After resetting the ink counter, the new destination is automatically printed, confirming the change.

A: The reset didn’t stick. Re-enter service mode and reset both Main and Platen counters simultaneously.

Once your printer is verified to be operating inside Service Mode, you can proceed with the software interaction steps: : Updates firmware or resets the printer after

The printer must be put into "Service Mode" manually before the software can communicate with it. This usually involves a sequence of holding the Stop/Reset USB Connection:

If you cannot get v4718 to work or want a more legitimate route, consider:

Prints or saves internal printer data, including error history, page counts, and ROM versions. Test Patterns:

Ultimate Guide to Canon Service Tool v4718 Updated: Reset Your Printer

Release the Power button. The Power light should stay steady green. : Open ServiceTool_V4718.exe on your Windows PC.