Sunlu T3 Firmware Jun 2026
For the tech-savvy user, the Sunlu T3’s firmware is based on open-source architecture, meaning it is theoretically possible to flash custom firmware. However, users should proceed with caution.
A MicroSD card (formatted to FAT32, 8GB or smaller is recommended for stability). The .bin firmware file. Installation Steps Download the desired firmware .bin file. Format Card: Format your microSD card to FAT32.
The Sunlu T3 has carved a niche for itself as a highly capable, budget-friendly FDM printer, largely due to its direct drive extruder and ultra-quiet motherboard. However, the hardware is only half the equation. The Sunlu T3’s firmware is the brains behind the operation, dictating everything from print precision to user accessibility.
Updating your Sunlu T3 firmware is the single fastest way to improve print quality without buying new hardware. sunlu t3 firmware
As of 2025, the most recent stable stock firmware for the standard Sunlu T3 board is version T3_V1.0.4.bin . This adds:
supports "Fast Printing" (clog detection) and "Resume Print" functions, which must be enabled in the firmware configuration to work properly. How to Flash Your Firmware
Here’s a quick look at a couple of widely noted issues with the stock firmware and how the community has addressed them. For the tech-savvy user, the Sunlu T3’s firmware
Before flashing any firmware, you must know what is inside your control box. Sunlu has been known to use motherboards that are clones or variants of popular Creality or MKS boards. Most Sunlu T3 printers feature:
Whether you are looking to fix bugs, unlock advanced features like Linear Advance, or convert your machine to Klipper, upgrading your Sunlu T3 firmware is the single best way to maximize your printer's potential. Why Upgrade Your Sunlu T3 Firmware?
// Stock display #define CR10_STOCKDISPLAY // For standard LCD The Sunlu T3 has carved a niche for
Even with the best preparations, issues can sometimes arise. Here are solutions to some common firmware-related problems on the Sunlu T3.
In the Linux terminal, run cd ~/klipper and then make menuconfig . Select the correct architecture matching your Sunlu T3 mainboard chip (e.g., STMicroelectronics STM32).
Users found that the original firmware mismanaged the cooling fans; the extruder fan only activated when motors were moving, rather than when the hotend was hot, potentially causing heat creep. It also lacked PID temperature support for the bed. Community & Custom Firmware Alternatives
Are you looking to or are you trying to add a new feature like a BLTouch sensor? denizkoekden/SUNLU-T3 - Marlin 3D Printer Firmware - GitHub
The Sunlu bootloader will not flash a file with the exact same name as the currently installed firmware. Rename the file to something unique, such as update2026.bin . Flash the Printer: Turn off the Sunlu T3. Insert the micro SD card into the printer's card slot. Turn on the printer.
„wiegt“?
Ich mag ja die deutsche Sprache und auch blumige Umschreibungen, aber das Megabytes etwas wiegen sollen, ist nun doch etwas weit hergeholt.
Und doch gängig.
Die Daten wiegen sogar wirklich was: https://www.ellipsix.net/blog/2009/04/how-much-does-data-weigh.html
Das war mir neu, Nicolas.
Wieder etwas gelernt und Danke für eure Arbeit!
Auf dem Atari wurde mal ein Tool angepriesen (auf der CeBit vorgestellt), das gegen mögliche Unwucht der HD, „Ausgleichsbits“ auf die Platte schrieb!
Nachzulesen in ST-Magazin oder TOS 1991 oder 1992 (Aprilausgabe).
Nice! Wollte @“Janus“ darauf hinweisen, dass dies tatsächlich so ist, aber dass das Gewicht so enorm ist, dass es für eine Unwucht sorgen kann bei den damaligen riesigen Festplatten (ungefähr so groß wie zwei 13″ MBAs nebeneinander und pro MBA als Stapel darauf noch ca. 7 MBAs darauf aufgetürmt) mit enormem Speicherplatz von ca. 30MB, hatte ich nicht gedacht. Oder war das evtl. ein übersehener Aprilscherz? :)
@“Leser dieses Threads“: Entweder erlaubt sich @“Janus“ einen Scherz, oder ist tatsächlich damals auf den Aprilscherz hereingefallen. Wie ich physikalisch dachte, ist der Gewichtsunterschied schon damals so gering gewesen, dass dies natürlich keine Unwucht verursachen konnte (der erwähnte Blogartikel per Link von Nicolas erklärt dies sehr verständlich).
Ist doch umgangssprachlich eine völlig normale Formulierung
Nach dem Update wurde bei mir das iCloud Drive deaktiviert und alle Dateien in einen Ordner mit dem Namen „iCloud Drive (Archiv)“ verschoben.
Soeben dieses schnüffelnde Feature sicherheitshalber nochmals für alles deaktiviert.
Wie meinen?
?
Es ist ein Trauerspiel, was Apple bezüglich der MacOS-Thematik seit Jahren abliefert. Als jahrelanger MAC-Benutzer nutze ich sogar privat immer öfter Windows. Traurig traurig…..
Android-Geräte kommen bei mir allerdings nicht mal annähernd in die Tüte, das iPhone ist noch immer ungeschlagen gut.