Zum Hauptinhalt springen Zum Menü springen

Wipe away contaminated grease from the reciprocating plunger mechanism and gears.

| Problem | Possible Cause | Solution | | :--- | :--- | :--- | | | 1. No power at the outlet. 2. Damaged power cord. 3. Worn carbon brushes. | 1. Check the socket with another device. 2. Inspect the cord. Do not use if damaged. Have it replaced by a professional. 3. The motor brushes are consumable items. Replace them, which is a routine repair. | | Loss of power/stalling | 1. Blade is dull or unsuitable for the material. 2. Motor overload. 3. Worn carbon brushes. | 1. Use a sharp blade designed for the material you are cutting. 2. Ease the feed pressure. Let the saw do the work. 3. Check and replace the carbon brushes. | | Excessive vibration or rough running | 1. Bent or damaged saw blade. 2. Loose blade clamp screw. 3. Worn guide rollers or bearings. | 1. Replace the blade. 2. Check and tighten the blade clamp screw. 3. If the guide roller is worn, you can find the bearings as spare parts. Your model may use a needle bearing (part 2600905046) which you can replace. | | Cutting inaccurately / wandering off line | 1. Dull blade. 2. Too much feed pressure. 3. Blade is not perpendicular to the soleplate. | 1. Fit a new, sharp blade. 2. Reduce pressure and guide the saw steadily. 3. Check the bevel adjustment. Loosen and reset the soleplate to 0°. | | The saw gets extremely hot | 1. Running at low speed for too long. 2. Dust-clogged ventilation slots. | 1. Let the saw run for 3 minutes at max speed without a blade. 2. Clean the ventilation slots with compressed air. |

Unplug the power cord from the wall outlet completely. Never service a tool that is connected to a live power source.

Work on a clean, well-lit table free of debris.

: You can search for and download manuals for both current and discontinued Bosch tools on the Bosch Professional User Manuals

The base plate can be adjusted for angled cuts up to 45° .

: If the cable is damaged, do not touch it; immediately disconnect the plug. Parts Availability

Unlike the PST 52A “Electronic” version, this model has:

Fixed Operational Procedures and Maintenance Protocols Applicability: Bosch PST 52 A (Variable Speed) Jigsaw Models

Always ensure the tool is unplugged before changing blades or performing maintenance. The

Perhaps you lost the paper manual that came with your Bosch PST 52A. Here is how to create a physical copy:

Always place the front edge of the footplate on the workpiece before starting. Move the saw into the material only once it has reached full speed. Dust Management:

If you need a specific, detailed schematic, Bosch offers a comprehensive database for their power tools, including older, discontinued models.

The tool is compatible with standard T-shank blades, such as the (for fast cuts) or (for clean cuts). The Guide Roller:

The most frequent problem is the jigsaw no longer holding the blade securely.

Bosch Pst 52a Manual Fixed Work <Pro · 2024>

Wipe away contaminated grease from the reciprocating plunger mechanism and gears.

| Problem | Possible Cause | Solution | | :--- | :--- | :--- | | | 1. No power at the outlet. 2. Damaged power cord. 3. Worn carbon brushes. | 1. Check the socket with another device. 2. Inspect the cord. Do not use if damaged. Have it replaced by a professional. 3. The motor brushes are consumable items. Replace them, which is a routine repair. | | Loss of power/stalling | 1. Blade is dull or unsuitable for the material. 2. Motor overload. 3. Worn carbon brushes. | 1. Use a sharp blade designed for the material you are cutting. 2. Ease the feed pressure. Let the saw do the work. 3. Check and replace the carbon brushes. | | Excessive vibration or rough running | 1. Bent or damaged saw blade. 2. Loose blade clamp screw. 3. Worn guide rollers or bearings. | 1. Replace the blade. 2. Check and tighten the blade clamp screw. 3. If the guide roller is worn, you can find the bearings as spare parts. Your model may use a needle bearing (part 2600905046) which you can replace. | | Cutting inaccurately / wandering off line | 1. Dull blade. 2. Too much feed pressure. 3. Blade is not perpendicular to the soleplate. | 1. Fit a new, sharp blade. 2. Reduce pressure and guide the saw steadily. 3. Check the bevel adjustment. Loosen and reset the soleplate to 0°. | | The saw gets extremely hot | 1. Running at low speed for too long. 2. Dust-clogged ventilation slots. | 1. Let the saw run for 3 minutes at max speed without a blade. 2. Clean the ventilation slots with compressed air. |

Unplug the power cord from the wall outlet completely. Never service a tool that is connected to a live power source.

Work on a clean, well-lit table free of debris. Bosch Pst 52a Manual Fixed

: You can search for and download manuals for both current and discontinued Bosch tools on the Bosch Professional User Manuals

The base plate can be adjusted for angled cuts up to 45° .

: If the cable is damaged, do not touch it; immediately disconnect the plug. Parts Availability Wipe away contaminated grease from the reciprocating plunger

Unlike the PST 52A “Electronic” version, this model has:

Fixed Operational Procedures and Maintenance Protocols Applicability: Bosch PST 52 A (Variable Speed) Jigsaw Models

Always ensure the tool is unplugged before changing blades or performing maintenance. The Worn carbon brushes

Perhaps you lost the paper manual that came with your Bosch PST 52A. Here is how to create a physical copy:

Always place the front edge of the footplate on the workpiece before starting. Move the saw into the material only once it has reached full speed. Dust Management:

If you need a specific, detailed schematic, Bosch offers a comprehensive database for their power tools, including older, discontinued models.

The tool is compatible with standard T-shank blades, such as the (for fast cuts) or (for clean cuts). The Guide Roller:

The most frequent problem is the jigsaw no longer holding the blade securely.