Published 29 articles in total
The DNM 5700 uses an automatic grease lubrication system. This reduces oil consumption by up to 60% compared to traditional oil-lubrication systems and prevents coolant contamination.
X/Y axes achieve 36 m/min (1,417 in/min), while Z-axis reaches 30 m/min (1,181 in/min).
The Doosan DNM 5700 is a vertical machining center (VMC) manufactured by Doosan, a South Korean company that produces a wide range of industrial machinery, including CNC machines.
0;1052;0;2cb; 0;908;0;f1; 0;88;0;98; 0;279;0;1c1; 0;1247;0;b1f;
0.54 MPa (5.5 kgf/cm², 78 psi) with a minimum flow volume of 200 L/min. Air must be filtered and dry to protect the pneumatic ATC cylinders and spindle purge systems. Lubrication and Coolant Systems dnm 5700 doosan pdf exclusive
The DNM 5700 isn't just about raw speed; it is about "smart" machining. Improved Thermal Accuracy
The is widely regarded as a "workhorse" vertical machining center (VMC) that balances heavy-duty performance with modern automation readiness.
Which matches your shop's current workflow?
Optimized for high-speed finishing with a standard 15,000 RPM spindle. Exclusive Engineering Features DNM 5700 12K The DNM 5700 uses an automatic grease lubrication system
: The bed is a one-piece casting made from fine grain Meehanite cast iron with heavy ribbing to prevent deformation under heavy loads.
: Features X/Y/Z axis travels of 1,050 x 570 x 510 mm (41.3" x 22.4" x 20.1").
Verify pneumatic pressure gauges read between 0.5 and 0.7 MPa. Drain the water separator on the main air preparation unit. Weekly and Monthly Maintenance Tasks
Better suited for aluminum, plastics, and intricate mold work. The Doosan DNM 5700 is a vertical machining
Two hours later, she was staring at a login screen buried in a Korean service portal. The file name: DNM5700_5AX_OPT_SECURE.pdf . A note attached: "For service managers only. Do not distribute."
A CNC machine is only as good as its control system, and the DNM 5700 offers operators a choice of several industry-leading interfaces.
The machine can be configured with various CNC controls to match the existing shop-floor infrastructure. Fanuc 0i-Plus (Doosan Fanuc i-Series)