Menu
) to install drivers for 58mm and 80mm thermal receipt printers. E-PoS Printer Driver Installation Steps To set up your printer using this specific driver: Connect Hardware
Restart your PC, then immediately run pos printer driver setup v11200exe again before launching any other application.
Choose this if you are using an 80mm (3-inch) wide receipt printer with an automatic cutter.
Click the button in the bottom right corner.
: Remove all protective tape and packaging from the printer. Plug the printer into a power source and turn it on. Load Media pos printer driver setup v11200exe
Click “Next” through the confirmation screens. The installer will copy files to C:\Program Files\POSPrinter\ (or similar) and register the driver with Windows. A final dialog box will ask to print a test page.
Different business environments require different types of drivers. Understanding which one you need is the first step to a successful setup.
: The installation wizard will guide you through the process. You will need to accept any license agreements, select the printer model from a list, and choose the type of connection you are using (e.g., USB, Serial, Ethernet).
Only for legacy hardware.
: Read through the terms, select I accept the agreement , and click Next .
If it is checked on a COM or LPT port by mistake, change it to the correct USB port. Click . Testing the Configuration
: For USB connections, click Detect USB Port . If you are using Ethernet or Serial, manually select the corresponding port (e.g., COM1 or a specific IP address).
Do not let the "1.12" fool you. While the number seems old, this driver package is still actively used for compatibility mode on Windows 10, Windows 11, and Windows Embedded POSReady 7. It acts as the translator between your POS software (like Loyverse, Square, NCR Silver, or even a custom C# application) and the physical hardware. ) to install drivers for 58mm and 80mm
The driver translates digital commands from a computer into physical actions, such as: Text Formatting : Proper alignment and font scaling for receipts. Peripheral Control
: If it doesn't print, go to Control Panel > Devices and Printers , right-click your POS printer, select Printer Properties , and ensure the correct USB port (e.g., USB001) is checked under the Ports tab.
Follow these steps to ensure a smooth installation of your printer driver. 1. Pre-Installation Check