Gunnebo Speedstile Fl Installation Manual

Overview of Installation Procedures and Technical Specifications for Gunnebo SpeedStile FL Speed Gates.

: Any horizontal conduits running below the SpeedStile must be at least 140mm below the Finished Floor Level (FFL) . 2. Technical Specifications SpeedStile FL

The SpeedStile FL is equipped with 36 infrared sensors and advanced algorithms to detect tailgating, piggybacking, intrusion, and wrong-way direction with high precision. The system automatically closes and resets if a passage is not completed within the pre-set timeout.

Always isolate the main power grid before handling any electrical connections. Electrical work must comply with local national wiring regulations. Power Connections gunnebo speedstile fl installation manual

The SpeedStile FL system consists of Master (Left), Slave (Right), and optional Intermediate (Center) cabinets for multi-lane configurations.

The SpeedStile FL is shipped in modular sections to protect the glass wings and polished stainless steel chassis.

If a sensor LED is flashing or red, adjust the internal chassis alignment slightly or clean the optical lens windows using a lint-free microfiber cloth. A solid green light indicates optimal optical alignment. Functional Verification Checklist Technical Specifications SpeedStile FL The SpeedStile FL is

Mechanical alignment determines the long-term reliability of the SpeedStile drive mechanisms. Step 1: Positioning Templates Place the drilling templates on the floor.

Connect the fire alarm override relay to the dedicated safety input. This input must be configured as Normally Closed (NC) so that an open circuit automatically opens the barriers. 5. Glass Wing Installation

is typically delivered as a pre-assembled unit but may require lifting gear due to its weight. Electrical work must comply with local national wiring

The finished floor must be perfectly level within

If you need help with a specific part of the setup, let me know:

Structural concrete depth must be at least 100mm to secure the expansion anchors properly.

Clean the exterior stainless steel panels with a specialized, non-abrasive stainless steel cleaner.

This report summarizes the essential installation, technical specifications, and operational guidelines for the series, based on manufacturer documentation. 1. Pre-Installation Requirements