By clicking “Enter” below and by accessing this website, you confirm the following:
• You are at least 18 years old and legally permitted to access adult content.
• You understand that this website contains adult material, including nudity.
• You have reviewed and agree to the Terms of Use.
• If you do not agree with the above, please leave this website immediately.
Unlike the older text-based ( .txt ) scatter files, the XML format allows for more complex, hierarchical mapping required by modern Android Verified Boot (AVB) and encrypted partitions. It is mandatory for devices that require specialized Secure Library Authentication (SLA) or Download Agent (DA) files. Prerequisites for Using XML Files in v6
: Installed on your computer to allow connection.
A valid scatter file for SP Flash Tool v6 is typically named MTxxxx_Android_scatter.txt (despite the .txt extension, the internal structure is strictly XML/Tag-based).
Check/uncheck partitions in GUI – tool reads XML and allows per-partition selection. sp flash tool v6 xml file
If your firmware folder contains an XML file instead of a traditional scatter file, follow these steps to flash your device: 1. Preparation : Ensure you have the MediaTek VCOM Preloader drivers
This structural header provides the flashing architecture with parameters defining the device's main processing engine and primary non-volatile memory controller.
The , serving as the foundational blueprint that instructs MediaTek’s updated software on how to partition, address, and flash partition image files onto modern MTK chipsets. Unlike the older text-based (
This occurs when the XML file is corrupted, incomplete, or incompatible with your SP Flash Tool version. Solutions:
For years, Android customizers and technicians using older editions (like v3 and v5) looked for a file named Android_scatter.txt to safely communicate partition layouts. However, modern architecture changes require MediaTek SP Flash Tool v6 to completely adapt. This shift often confuses users who receive a "scatter loading file error" when trying to load old formats.
: Select "Download Only" for safety, click the Download button, and connect your powered-off device. A valid scatter file for SP Flash Tool
is the core configuration map required to flash modern MediaTek (MTK) Android smartphones and tablets. It fundamentally replaces the legacy text-based .txt scatter files used in version 5. If you are updating a device running a newer chipset, understand how this architecture operates to prevent accidental device corruption. What is the SP Flash Tool v6 XML File?
Erases the entire chip including critical IMEI/NVRAM data (Avoid unless fixing a hard-bricked state). Step 5: Execute the Flash
This paper provides a technical overview of the XML scatter file format used by SP Flash Tool v6. As MediaTek devices have evolved, the partition layout structure has transitioned from text-based definitions to complex XML hierarchies. This document details the structure of the scatter.txt (XML formatted) file, explains critical partition attributes, and outlines the procedure for manual modification to support custom firmware flashing.
The XML file is corrupted, or it was written for a version of SP Flash Tool v6 different from the one you are running.