This means the computer cannot communicate with the phone. Reinstall the MediaTek USB VCOM drivers, try a different USB port (preferably a USB 2.0 port on the back of the PC), or switch to a different USB cable.
: Sometimes required for newer MT6731 devices to bypass secure boot authentication. General Flashing Procedure
Use this option if you are upgrading to a completely new version of Android.
If you want, I can:
Download and install the on your PC. Restart your computer after installation.
Boot the phone into stock recovery mode (usually by holding Power + Volume Up together while off) and perform a "Wipe Data / Factory Reset".
Flashing the MT6731 firmware is typically performed to resolve the following issues: Unbricking:
The MediaTek MT6731 is an entry-level, quad-core processor designed primarily for budget-friendly smartphones, smart feature phones, and IoT devices. It integrates 4G LTE connectivity with optimized power efficiency for low-end hardware.
(Recommended) Refreshes system partitions without affecting critical hardware calibration data like your IMEI number. Use this first.
In the drop-down menu located just below the scatter file path, you will see flashing options.
The tool will automatically populate the partition list below with checked boxes. Step 4: Choose the Correct Flashing Mode
Corrects instances where the device hangs infinitely on the startup logo.
Used when upgrading the operating system version.
Flashing overwrites the entire internal storage. Back up your photos, contacts, and personal files to a cloud service or a computer.
Click the green button located at the top of the SP Flash Tool interface. The tool will enter a standby phase, waiting for the device to connect. Step 6: Connect Your Device