The external ports typically found on the back of the case:
The (also known as the Foxconn Eton ) is a micro-ATX motherboard commonly used in HP and Compaq desktop PCs, such as the HP Compaq 500B MT series. Key Specifications Form Factor: Micro-ATX (uATX), roughly Socket Type: LGA 775 .
:
I’m unable to provide a full “story” in the narrative sense for the manual, because that specific board is a budget Foxconn motherboard (often used in HP, Compaq, or eMachines prebuilt PCs). There is no official “story” or novel-like manual for it — only technical documentation. h-ig41-uatx rev 1.1 manual
| Connector | Label | Function | |-----------|-------|----------| | | CPU_FAN | 4-pin PWM CPU fan | | SYS_FAN | SYS_FAN | 3-pin chassis fan | | ATX_POWER | ATX_24P | Main power (24-pin) | | ATX_12V | ATX_4P | CPU power (4-pin) | | DIMM_A1/B1 | DDR3 | Memory slots | | SATA1-4 | SATA1~4 | SATA 2.0 ports | | IDE | PATA | 40-pin IDE (master/slave) | | F_PANEL | F_PANEL | Front panel switch/LED header | | USB | F_USB1/2 | Front USB 2.0 (9-pin) | | AUDIO | F_AUDIO | Front panel HD Audio/AC’97 | | CLR_CMOS | CLR_CMOS | 2-pin jumper to clear BIOS | | COM | COM | Serial port header (optional) | | SPEAKER | SPEAK | 4-pin speaker header | | CD_IN | CD_IN | Analog CD audio input (4-pin) |
The H-IG41-UATX Rev 1.1 is a legacy board suitable for light office work, home servers, or retro gaming builds using LGA 775 processors. When troubleshooting, verify the RAM type (DDR2 vs DDR3) physically, as manuals found online may cover multiple revisions with different memory slots.
Pin 2 [ HDD_LED + ] Pin 4 [ HDD_LED - ] Pin 6 [ RESET_SW ] Pin 8 [ RESET_SW ] Pin 10 [ KEY / Empty ] Pin 1 [ PWR_LED + ] Pin 3 [ PWR_LED - ] Pin 5 [ PWR_SW ] Pin 7 [ PWR_SW ] Pin 9 [ NC / Ground ] The external ports typically found on the back
Driver essentials (Windows 7 32/64-bit):
Official specs for some revisions often state 4GB maximum (2x 2GB). However, some users report 8GB (2x 4GB) capability with later BIOS updates. Type: Unbuffered non-ECC DIMMs only. 5. Expansion Slots & Storage PCIe x16: 1x Slot (For dedicated graphics card upgrades). PCIe x1: 2x Slots. PCI: 1x 32-bit PCI slot. Storage: 4x SATA II ports.
USB Headers (F_USB1 / F_USB2)These allow for front-case USB 2.0 ports. Each header supports two USB ports. Ensure the red wire (VCC) aligns with Pin 1. There is no official “story” or novel-like manual
: Supports 45nm and 65nm Intel processors, including Core 2 Quad , Core 2 Duo , Pentium, and Celeron (Conroe/Allendale architectures).
: Two DDR3 DIMM slots supporting up to 4 GB of total RAM (2x 2GB modules). Type : PC3-10600 (1333 MHz) or PC3-8500 (1066 MHz). Voltage : 1.5V non-ECC unbuffered memory. Expansion Slots : 1x PCI Express x16 (for dedicated graphics). 2x PCI Express x1. 1x PCI (32-bit). 1x Mini PCI (typically for wireless cards). Storage : 4x SATA II (3.0 Gb/s) ports.
The G41 chipset is very picky about high-density DDR3 modules.