Grundig Satellit 750 Service Manual [cracked] Official
Let’s say your Satellit 750 has .
The radio utilizes a dual-conversion superheterodyne structure for AM/LW/SW frequencies. The first Intermediate Frequency (IF) is set high at 55.845 MHz to eliminate image frequencies, while the second IF drops to a standard 455 kHz for narrow filtering and demodulation. FM and Aircraft bands utilize a single-conversion design with a 10.7 MHz IF.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
| Feature | Specification | | :--- | :--- | | | LW (100-519 kHz), MW (520-1710 kHz), SW (1711-29999 kHz), FM (88-108 MHz), AIR (118-138 MHz) | | Tuning Methods | Automatic (ATS), Manual (Knob/Button), Direct Keypad Entry, Memory Scan | | Memory | 1000 Stations across all bands | | Special Modes | SSB (Single Side Band) with BFO adjustment | | Antennas | 360° Rotatable Ferrite Bar (AM), Telescopic Whip (FM/SW), BNC External (50Ω) | | Audio Outputs | Internal Speaker, Headphone Jack (Stereo), Line Output | | Audio Input | Line Input (for MP3 players) | | Power Supply | 4 x D size Batteries, or 6V DC AC Adapter | | Dimensions (WxHxD) | 372 x 184 x 153 mm (14.65 x 7.24 x 6.02 inches) | | Weight | 2.66 kg (5.86 lbs) without batteries | grundig satellit 750 service manual
: 55.845 MHz (1st IF), 455 kHz (2nd IF), and 10.7 MHz (FM).
Turn off the radio. Disconnect the external AC adapter. Remove the battery compartment cover and take out all four D-cell batteries. Take off the external shortwave whip antenna if it is damaged, or ensure it is fully retracted. Step 2: Removing the Knobs
MW (AM): 520 kHz – 1710 kHz (with selectable 9/10 kHz steps) SW: 1711 kHz – 29999 kHz (Continuous) AIR: 118 MHz – 137 MHz FM: 76 MHz – 108 MHz (Stereo via headphones) Let’s say your Satellit 750 has
Warning: RF alignment requires specialized test equipment. Do not adjust internal trimmer capacitors or inductor cores without a calibrated signal generator, an oscilloscope, and an RF frequency counter.
Which (like a multimeter or signal generator) do you currently have available? Share public link
The Grundig Satellit 750 (also sold as the Tecsun S-2000) is a legendary flagship shortwave receiver favored by DXing enthusiasts worldwide. Combining a classic desktop aesthetic with advanced dual-conversion circuitry, this radio offers exceptional sensitivity across AM, FM, Shortwave, Longwave, and Aircraft bands. However, like any sophisticated piece of RF (Radio Frequency) hardware, maintaining its peak performance over time requires technical intervention. FM and Aircraft bands utilize a single-conversion design
Common service issues for the Satellit 750 often involve mechanical wear or component aging:
Is it having trouble on (AM, FM, Shortwave, or Air)?
The closest official document available is the , which can be found on sites like ManualsLib. It contains the basic operating instructions and a limited troubleshooting section. This is identical to the Grundig/Eton user manual but may be easier to locate.
To verify local oscillator (LO) and Phase-Locked Loop (PLL) frequencies.

