Life Probo Pr70 Instructions For Installation Use And Maintenance Manual 10 Pages Upd -

Mark 2 holes 80mm apart. Use 6mm drill bit. Insert anchors. Attach bracket, then snap PR70 into place.

: Briefly press the blue button, then press the button on your transmitter to pair it. 5. Manual Release and Use

Thank you for purchasing the Life Probo PR70. This 10-page manual provides comprehensive instructions for installation, daily use, and long-term maintenance. Failure to follow these guidelines may void the warranty.

Gently detach the protective plastic cover cap from the main chassis base, taking care not to strain the rear alignment tabs. Mark 2 holes 80mm apart

The control card LED will flash rapidly to indicate successful pairing. 7. Operational Modes and Features Manual Release Operation

The setup is complete when the green LEDs flash, indicating the stroke is stored, with the red LED marking the closed position. 3.2. Transmitter/Remote Learning Enter Learning Mode: Briefly press the blue button.

For garages that do not have a second access, the ASEC PR device for manual release from outside must be installed. Attach bracket, then snap PR70 into place

Regular maintenance is essential to ensure that your Life Pro Bo PR70 continues to function optimally. Here are the steps to follow:

1.0

The LIFE Probo PR70 is an electromechanical irreversible gear motor designed for residential sectional and spring-counterbalanced overhead garage doors. It features a 24V DC motor, an intelligent digital control unit, and an optical encoder for precise positioning. Technical Data Table 230V AC (50/60 Hz) Motor Voltage: 24V DC Maximum Power Consumption: 100W Maximum Thrust Force: 700N Opening Speed: 0.14 meters per second Duty Cycle: Residential use (intensive) Protection Rating: IP20 (Indoor use only) Operating Temperature: -20°C to +55°C SECTION 3: PRE-INSTALLATION CHECKLIST AND TOOLS Required Necessary Tools Electric drill with masonry and metal bits. Set of open-ended wrenches and socket sets. Phillips and flat-head insulated screwdrivers. Spirit level and digital measuring tape. Wire strippers and electrical terminal crimping tools. Sturdy ladder matching your ceiling height. Structural Checks Manual Release and Use Thank you for purchasing

Activate the door using wall switches, remotes, or external keypads. Do not force the door open if it stops moving mid-cycle.

. The 10-page instruction manual covers essential phases from preliminary checks to maintenance. www.homelife.it 1. Installation Essentials Preliminary Checks

Routine maintenance prevents premature wear and ensures smooth, quiet operation. Quarterly Tasks (Every 3 Months)