: A lightweight application that requires no formal installation—just run the executable. How to Use the Tool Utility | Service / Support - GIGABYTE Global
If you encounter issues during or after running the tool, review these common troubleshooting scenarios. "Failed to Mount Image" Error
This must be checked to resolve the keyboard and mouse freeze issue.
The Gigabyte Windows USB Installation Tool is a free, lightweight utility developed to patch Windows installation packages. It modifies a standard Windows 7 ISO image or an existing bootable USB flash drive by injecting the required xHCI (USB 3.0) and NVMe drivers directly into the installation files ( boot.wim and install.wim ).
) solves this by "slipstreaming" or injecting the necessary USB 3.0 and NVMe drivers directly into your installation media. Why You Need This Utility Fixes Non-Responsive Peripherals
For Windows 11 and most modern Windows 10/11 installations, this tool is usually not needed because those OS versions include native USB 3.x drivers. However, it remains essential for:
A valid ISO file of the Windows operating system you wish to install.
The official Gigabyte Windows USB Installation Tool package extracted to your working PC. Step-by-Step Installation Guide
The is a proprietary software utility designed primarily for Gigabyte motherboard users. It is designed to bridge the gap between older operating systems (Windows 7/8.1) and newer hardware (Intel 100/200/300 series or AMD equivalents) that lack native USB support in the base Windows installer. Key Features
A drive with at least 8 GB (for Windows 7) or 16 GB (for Windows 10/11) of capacity. Note that all data on this drive will be erased .
Proceed through the Windows installation wizard. Your mouse, keyboard, and NVMe hard drives will now function correctly throughout the entire process.
The tool can also slipstream NVMe drivers, allowing the installer to recognize high-speed M.2 SSDs that were not common when Windows 7 was released. Download and Availability
If you’ve ever tried installing Windows 7 on a modern Gigabyte motherboard (especially Intel 100/200/300 series or newer), you’ve likely run into the dreaded error during setup. The system can’t see your SSD or NVMe drive because Windows 7 lacks native USB 3.0/NVMe drivers.
Are you installing onto a or an NVMe M.2 drive ?
Older Windows installers (especially Windows 7) do not include native xHCI (USB 3.0) drivers. Because modern motherboards rely entirely on xHCI controllers, your USB mouse, keyboard, and even the installation drive itself will drop connection the moment the setup wizard loads.
Older operating system installers, such as the original Windows 7 ISO, lack native support for the protocol. They only include drivers for the older eHCI (Enhanced Host Controller Interface) protocol.
