Canon Service Tool V.4718 <2026>

If you have a Canon MegaTank (G-series), do not use v.4718. Canon designed these with a replaceable "Maintenance Cartridge" (MC-30 or MC-31). You just buy a new box ($12) and snap it in. The printer automatically resets. Note: V.4718 can force-reset these, but you will ruin the physical box.

Press and hold the button (represented by a triangle inside a circle).

Note: While version 4718 is robust for the models above, other series like the MG or MX may require different versions (e.g., v.4713 or v.3400) depending on their release year. How to Use Canon Service Tool v.4718

Always verify your printer’s service manual before proceeding.

Using a service tool improperly can permanently "brick" your printer (render its mainboard unusable). Follow these safety rules strictly: canon service tool v.4718

Below is an extensive guide covering what this tool does, how to use it safely, and how to avoid damaging your printer. What is Canon Service Tool v.4718?

Find the section. Next to Absorber , ensure it is set to Main .

The Canon Service Tool v.4718 is a specialized service application developed by Canon engineers (leaked for public use) to manage printer maintenance, diagnostics, and internal setting adjustments. Its primary function is to reset the to 0%.

The printer must be connected directly to the computer via a USB cable. It cannot be used via wireless (Wi-Fi) or network (LAN) connections. If you have a Canon MegaTank (G-series), do not use v

The Service Tool will not recognize your printer if it is turned on normally. You must manually boot the hardware into using a specific sequence of button presses.

The printer's LED should turn green and remain steady (not blinking). The printer is now in Service Mode. Step 2: Running the Tool

Right-click on ServiceTool.exe and select . Look at the top section labeled Main .

The Ultimate Guide to Canon Service Tool v.4718: Resetting your Printer The printer automatically resets

The effectiveness of any service tool depends heavily on the printer model. Using an incompatible version can lock you out of service mode entirely, potentially bricking the device. The v.4718 tool is generally compatible with specific generations of Canon printers. It is most suitable for printers using the PGI-x20/CLI-x21, PGI-x25/CLI-x26, and PGI-x50/CLI-x51 cartridge generations.

is a popular commercial alternative that supports many Canon models and has a guided interface. It costs about $10 per reset.

Next, navigate to the section at the bottom of the interface. Ensure the Counter Value is set to 0% and click Set .

This usually happens if you attempt to use the tool over Wi-Fi, or if your printer has a hardware malfunction.

, which indicates the software cannot communicate with the device. This is usually caused by: The printer not being in the correct Service Mode.

a specific number of times (typically 5 or 6 depending on the model).