Enter the 4-digit code ( 0000 ). The green light will turn on. Turn the knob clockwise, and pull the door open.
: Insert 3 fresh 1.5V AA batteries, matching the positive (+) and negative (-) terminals.
Do not proceed if any defect is found.
Do you need instructions translated from a (like Danish or Norwegian)?
Keep the safe door wide open while programming to avoid accidentally locking yourself out. Xtra Safe Kt 82001 Manual
Press the once; a beep will sound and a "proceed" light will typically illuminate. Enter your desired 3-to-8 digit code on the keypad.
With the door open, turn the main knob counterclockwise to extend the locking bolts.
Unlike consumer electronics, the KT 82001 requires precise configuration. The is not just a user guide; it is a legal document in many jurisdictions proving that the device has been installed according to safety standards (ISO 13849-1, IEC 62061).
Input your new custom code (between 3 and 8 digits) on the external keypad. Enter the 4-digit code ( 0000 )
While holding the key in place, turn the main safe knob clockwise and pull the door open.
The Xtra Safe Kt 82001 is a private digital safe designed for a wide range of uses, from home security to protecting valuables during travel. It combines the security of a solid one-piece construction with an easy-to-use electronic keypad.
This article provides a complete overview of the , including initial setup, operation, battery replacement, and troubleshooting. 1. Initial Setup and Opening the Safe
Note: The Xtra Safe KT 82001 is designed for children and is not intended to be used as a high-security safe. : Insert 3 fresh 1
Remember these three golden rules extracted from the manual:
: Screw the cover back in place. A startup tone or beep indicates the unit is successfully powered. 🔑 How to Open the Safe for the First Time
The manual mandates checking for:
Insert your electronic security card into the designated slot.