For further information on the Intronics Digital Room Thermostat, refer to the following resources:
Most units allow for 4–6 "events" per day (e.g., Wake, Leave, Return, Sleep).
Use the arrows to choose between Weekdays (1-5) and Weekends (6-7). Time Slots:
For most digital models (e.g., DT-03, DT-08, and Series II), the core controls remain consistent: Power On/Off : Press the button to toggle the unit. Most models feature an Auto Restart
: Use pliers to open the plastic hole on the side for surface-mounted wiring. Secure Back Plate intronics digital room thermostat user guide
| Action | Button Combination | | :--- | :--- | | Adjust Temperature | ▲ or ▼ (Up/Down) | | Power On/Off | ON/OFF switch (PI-02, PI-04, DT08) | | Enter Installer Setup | Hold ▲ + ▼ for 10 seconds | | Toggle Decimal Temperature | Hold ▲ + ▼ simultaneously (Program 8.0/9.1) |
The Intronics Digital Room Thermostat comes equipped with the following features:
: Flashes when the AA or AAA batteries need immediate replacement. Button Functions SET / PRG : Enters programming mode and saves settings.
Mount your thermostat approximately 1.5 meters (5 feet) above the floor. Avoid placing it in direct sunlight, near drafty doors, or close to hidden hot water pipes. False temperature readings will cause your system to short-cycle. 2. Mounting the Backplate For further information on the Intronics Digital Room
If you need help resolving a specific issue with your Intronics thermostat, let me know: The of your device
Press and hold the Set or Prog button until the clock begins to flash.
: Ensure the AA batteries are fully charged and installed correctly.
Keep your fan set to AUTO instead of ON . Leaving the fan running constantly uses significantly more electricity and can pull humidity back into your home during summer months. To help me tailor this guide further, let me know: Most models feature an Auto Restart : Use
Check that the Mode is set to Heat or Cool and that the setpoint is higher (for heat) or lower (for cool) than the current room temperature.
Activate program mode:
Press or ▼ to reach your desired temperature, then press the HOLD button. The thermostat will maintain this exact temperature indefinitely. To cancel this and return to your schedule, press the RUN button. 🔋 Maintenance and Battery Replacement
Before touching any wires or buttons, read these critical safety notes: