Verify that you downloaded firmware specifically for the I-Series (K51) NVRs. Flashing E-series (K41) or K-series (K52) firmware onto an I-series machine will trigger this error.
The system will reboot automatically. Method 2: Remote Update via Web Browser Connect your PC to the same local network as the NVR.
Before upgrading, log into your NVR via a web browser or local monitor. Go to and note your current firmware version and build number. This prevents you from accidentally downloading an older file. Step 2: Preparing for the Update
: Download the latest firmware (usually a digicap.dav file) and save it to the root directory of a FAT32-formatted USB drive.
For Australian units, it is critical to use region-specific firmware to avoid compatibility issues or "bricking" your device. Official Portal: The primary source for Australian users is the Hikvision Australia & New Zealand Firmware Download Version Confusion: ds7616nii2 16p firmware australia
Locating the correct firmware for Australian units can be tricky as the official AU site often directs users to global or software-specific pages. Hikvision Global Portal
the correct firmware file ( .dav extension) to your computer. Unzip the file (if necessary). Copy the file to a FAT32-formatted USB flash drive. Insert the USB stick into a free USB port on the NVR. Upgrade Procedure
To ensure optimal performance and security, it is recommended to:
Right-click on the screen, log in with your admin password, and go to . Select the Local Upgrade tab. Verify that you downloaded firmware specifically for the
📥 Contact Hikvision AU support or your local distributor. Avoid third-party file hosts – several fake “DS-7616NII2” updates bricked units last quarter.
Drop your firmware version below 👇
Closes critical network vulnerabilities, protecting your surveillance footage from external hacking attempts. Where to Download Official Firmware for Australia
Never download security firmware from third-party forums or unverified tech blogs. Always use official Hikvision repositories. 1. Hikvision Oceania / Australia Portal Method 2: Remote Update via Web Browser Connect
Under the Remote Upgrade section, click Browse and select the downloaded digicap.dav file on your computer.
If you have confirmed your hardware version (e.g., V4.x) and the unit is an Australian-stock model (serial number starts with "AUS"):
: Download the correct firmware file (usually named digicap.dav ) and copy it to the root directory of a FAT32-formatted USB drive.
confirms it features 16 built-in Plug-and-Play Power over Ethernet (PoE) ports.
Upgrading firmware carries inherent risk. A power failure or network interruption during the process can "brick" your NVR, rendering it unusable. Follow these safety steps: