Kolbus: Da 36 Manual

Kolbus DA 36 is a vintage, high-speed automatic casemaker primarily used in bookbinding for the production of hardcovers. While specific digital manuals for this legacy machine are rare online, it remains a staple in used machinery markets due to its mechanical reliability. pressXchange Machine Specifications

Regular inspection of safety guards and emergency stops. 5. Locating the Kolbus DA 36 Manual

According to best practices outlined in technical documentation, the setup of the is crucial for preventing material waste.

Pump speed too high; incorrect water-to-glue ratio; low-quality adhesive.

The following are the hallmark features of the Kolbus DA 36: Kolbus Da 36 Manual

Glue film is too thin; glue temperature is too low; insufficient roller pressure.

If using a rigid spine, adjust the center magazine to match the spine width.

Given that the is a specialized, industrial machine, obtaining a physical or digital copy of the manual is crucial. It is usually available through:

The manual typically details several critical systems that work in tandem to produce a finished case: Kolbus DA 36 Used machines - Exapro Kolbus DA 36 is a vintage, high-speed automatic

Operating the machine with guards open can lead to severe crush or burn injuries.

Official digital or physical copies of the manual are generally available through: KOLBUS Direct: Contact the manufacturer's Service Department or use the KOLBUS 360 Assist

Before operating or adjusting the Kolbus DA 36, it is critical to understand its mechanical limits and capabilities. Running materials outside of these parameters can cause jam-ups, poor gluing quality, or mechanical damage. Size Range Capabilities 405 mm x 560 mm (15.94" x 22.05") Minimum Case Size (Open): 110 mm x 155 mm (4.33" x 6.10") Maximum Joint Width: 14 mm (0.55") Turn-in Width: 8 mm to 15 mm (0.31" to 0.59") Material Specifications Board Thickness: 1.0 mm to 4.0 mm (0.04" to 0.16") Spine (Center Strip) Thickness: Up to 3.0 mm (0.12")

occasionally host scanned technical overviews of Kolbus equipment. Machinery Dealers The following are the hallmark features of the

Supports book block thicknesses from approximately 5 mm to 70 mm. Operational Features & Design

This document covers for all variants of the DA 36.

Uses suction heads to lift individual pre-cut cover sheets (cloth or paper) from a stack, feeding them into the cylinder gripper mechanism.

While Kolbus has released newer models (such as the DA 40 and DA 50), the DA 36 remains in operation globally. Its continued use is a testament to "over-engineering"—a trait that allows these machines to run for decades if properly maintained. This paper outlines the operational lifecycle of the DA 36, from initial setup to daily maintenance.

In the demanding world of industrial bookbinding, the (often referred to as a casemaker) stands as a stalwart of precision, durability, and high-speed production. For operators, maintenance teams, and production managers, the Kolbus DA 36 manual is not merely a document—it is an indispensable toolkit for maintaining peak operational efficiency.